Minimum Bottom Line Profit Should Be > 7%!
After Income Taxes Are Paid!
The most effective form of a financial feedback loop in residential construction is phase accounting. Phase accounting is a subset of cost accounting and generates accurate information in the world of new home and residential additions for small contractors building up to 20 houses per year.
There are five remaining phases to cover in this form of cost accounting used in construction. This particular article covers the fifth phase – Trades.
This section covers the three traditional trades that require a license from their respective state. This is your HVAC installer, the electrician and the plumber. In some contractor may wish to include the septic tank and water well installer. However, I prefer these two be included in the site development phase as they do impact the site and there is only one connection to the main builder for these two particular trades. But as I stated in Part I, if you choose to place them in this phase, be consistent and all future projects should have the septic and well costs placed in the same phase.
This phase is where a contractor needs to exercise caution in dealing with the subcontractors. Oftentimes issues arise out of who is responsible for what cost as it relates to that trade.
For the plumber, he should be clear as to what fixtures, piping, and water lines to address. Who pays for the connection to the sewer/septic tank? How do we address the sprinkler system or providing water drops in the basement or the exterior of the home? The electrician should identify and there should be clarity in who pays for the electrical hookup of the HVAC system. Typically the plans identify the respective responsibilities of the parties, but there are always changes that will occur. If the prospective homebuyer wants recessed lights, what is the marginal cost to the homeowner, how much will the electrician charge etc? Make sure you are clear with the electrician on prospective changes. Address the following with him:
1. Exterior lighting
2. Sound system issues
3. Well wiring
4. Out Buildings wiring
5. Landscape lighting or power
6. Can lights and specialty lights
7. Code compliance issues if the wiring diagram is not in compliance with the code.
As for the HVAC guy, their industry has changed a lot in the last 10 years. The federal government changed the SEER rating requirements increasing the costs of these systems. Code compliance issues will arise during installation. Furthermore, if you are using gas lines, how do you address code compliance here if the plans are not in accordance with the code? What do you charge for possible change orders, such as an increase in tonnage for the AC system or what if the homeowner wants to go to a continuous water heater system? He should provide you with a list of possible change orders and the associated values to charge the prospective buyer.
Finally, address how and who will pay for errors. This is a true story of how a plumber makes a mistake costing a lot of money to the contractor because neither party was clear in their agreement as to who caused the error.
The next article in this series will cover two more of the phases in phase accounting. As you implement this type of accounting, you can see the value generated over several projects. As time goes on, margins will begin to increase for you and contractor stress will begin to decrease. You have a much clearer picture of the true costs of constructing a home or building an addition. Act on Knowledge.